[Peeweelinux] Kernel panic: no init found.
Tom Schneider
[email protected]
Wed, 27 Nov 2002 11:34:19 -0600
--------------060709020408020403060604
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
I got this error when I was trying to use an old version of LILO
(patched with mtd) on a 2.4 kernel. If you're working with the latest
2.4 kernels, use the latest version of LILO. (which has built-in
disk-on-chip support)
Tom
Ricardo Trindade wrote:
>I once had that error with a broken computer
>
>
>-----Original Message-----
>From: [email protected]
>[mailto:[email protected]]On Behalf Of Ken Emmons, Jr.
>Sent: quarta-feira, 27 de Novembro de 2002 17:07
>To: [email protected]
>Subject: Re: [Peeweelinux] Kernel panic: no init found.
>
>
>It appears as if you don't have the init program installed.
>
>go to your project_folder/mnt/ folder and look to see if the init program is
>there. It is probably in mnt/sbin/init.
>
>For some reason your config might not include init (although I can't imagine
>how..)
>
>~Ken
>
>
>
>>>>Hanoi Santos Hung <[email protected]> 11/27 10:42 AM >>>
>>>>
>>>>
>Hello:
>I'm working in a almost full configuration, only excluding X and some
>network and video drivers, with the last version of peewee.I change
>the bzimage for bzimage-full and I'm booting from a 16 MB Compact
>Flash located in hdc for programming and in hda for booting.
>I'm using a GX1 SBC Card with Cx5530 Chipset and 64 MB Ram
>
>This is the error message:
>
>hda: Sandisk SDCFB-16, ATA DISK drive
>ide0 at 0x1f0-0x1f7 on irq 14
>hda: Sandisk SDFCB-16, 15 MB w/1kB Cache, CHS=490/2/32
>Floppy drives(s):fd0 is 1.44M
>FDC 0 is a post-1991 82077
>scsi : 0 hosts
>scsi : detected total
>Partition check:
>RAMDISK: Compressed image found at block 0
>VFS Mounted root (ext2 filesystem).
>Freeing unused kernel memory: 84 freed
>Kernel Panic: no init found. Try passing init= option to kernel
>
>
>
>--
>Best regards,
>Ing Hanoi Santos
> mailto:[email protected]
>
>_______________________________________________
>Peeweelinux mailing list
>[email protected]
>http://mail.adis.on.ca/lists/listinfo/peeweelinux
>
>_______________________________________________
>Peeweelinux mailing list
>[email protected]
>http://mail.adis.on.ca/lists/listinfo/peeweelinux
>
>_______________________________________________
>Peeweelinux mailing list
>[email protected]
>http://mail.adis.on.ca/lists/listinfo/peeweelinux
>
>
--------------060709020408020403060604
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<title></title>
</head>
<body>
I got this error when I was trying to use an old version of LILO
(patched with mtd) on a 2.4 kernel. If you're working with the latest
2.4 kernels, use the latest version of LILO. (which has built-in
disk-on-chip support)<br>
Tom<br>
<br>
Ricardo Trindade wrote:<br>
<blockquote type="cite" cite="mid000001c29639$5ca8bde0$c2fb0dd5@ricardo">
<pre wrap="">I once had that error with a broken computer
-----Original Message-----
From: <a class="moz-txt-link-abbreviated" href="mailto:[email protected]">[email protected]</a>
[<a class="moz-txt-link-freetext" href="mailto:[email protected]">mailto:[email protected]</a>]On Behalf Of Ken Emmons, Jr.
Sent: quarta-feira, 27 de Novembro de 2002 17:07
To: <a class="moz-txt-link-abbreviated" href="mailto:[email protected]">[email protected]</a>
Subject: Re: [Peeweelinux] Kernel panic: no init found.
It appears as if you don't have the init program installed.
go to your project_folder/mnt/ folder and look to see if the init program is
there. It is probably in mnt/sbin/init.
For some reason your config might not include init (although I can't imagine
how..)
~Ken
</pre>
<blockquote type="cite">
<blockquote type="cite">
<blockquote type="cite">
<pre wrap="">Hanoi Santos Hung <a class="moz-txt-link-rfc2396E" href="mailto:[email protected]"><[email protected]></a> 11/27 10:42 AM >>>
</pre>
</blockquote>
</blockquote>
</blockquote>
<pre wrap=""><!---->Hello:
I'm working in a almost full configuration, only excluding X and some
network and video drivers, with the last version of peewee.I change
the bzimage for bzimage-full and I'm booting from a 16 MB Compact
Flash located in hdc for programming and in hda for booting.
I'm using a GX1 SBC Card with Cx5530 Chipset and 64 MB Ram
This is the error message:
hda: Sandisk SDCFB-16, ATA DISK drive
ide0 at 0x1f0-0x1f7 on irq 14
hda: Sandisk SDFCB-16, 15 MB w/1kB Cache, CHS=490/2/32
Floppy drives(s):fd0 is 1.44M
FDC 0 is a post-1991 82077
scsi : 0 hosts
scsi : detected total
Partition check:
RAMDISK: Compressed image found at block 0
VFS Mounted root (ext2 filesystem).
Freeing unused kernel memory: 84 freed
Kernel Panic: no init found. Try passing init= option to kernel
--
Best regards,
Ing Hanoi Santos
<a class="moz-txt-link-freetext" href="mailto:[email protected]">mailto:[email protected]</a>
_______________________________________________
Peeweelinux mailing list
<a class="moz-txt-link-abbreviated" href="mailto:[email protected]">[email protected]</a>
<a class="moz-txt-link-freetext" href="http://mail.adis.on.ca/lists/listinfo/peeweelinux">http://mail.adis.on.ca/lists/listinfo/peeweelinux</a>
_______________________________________________
Peeweelinux mailing list
<a class="moz-txt-link-abbreviated" href="mailto:[email protected]">[email protected]</a>
<a class="moz-txt-link-freetext" href="http://mail.adis.on.ca/lists/listinfo/peeweelinux">http://mail.adis.on.ca/lists/listinfo/peeweelinux</a>
_______________________________________________
Peeweelinux mailing list
<a class="moz-txt-link-abbreviated" href="mailto:[email protected]">[email protected]</a>
<a class="moz-txt-link-freetext" href="http://mail.adis.on.ca/lists/listinfo/peeweelinux">http://mail.adis.on.ca/lists/listinfo/peeweelinux</a>
</pre>
</blockquote>
<br>
</body>
</html>
--------------060709020408020403060604--