[Peeweelinux] RE compact flash partitions

[Adi Linden]

Hi,

Have you considered syslinux as bootloader? It works from a DOS filesystem 
but doesn't require any DOS related files.

Adi


On Mon, 14 Jan 2002, Matthew Schumacher wrote:

> I had problems with my cf card and in the end I put a dos filesystem on
> it and used loadlin in the autoexec.bat to load the linux kernel. 
> 
> I realize that this isn't the best way to to do this, but I just
> couldn't make it boot from a linux filesystem.
> 
> Later,
> 
> schu
> 
> daniel hennessey wrote:
> > 
> > Hi all,
> > 
> > I have found the reason why when I cannot boot from the peeweelinux installation on my compact flash card! Whenever I put the card in the cf-ide converter, it either cannot read or corrupts the partition table! I haven't worked out if it is the mobo, the cf-ide conv or the cf card itself. The other thing I cannot work out is what the geometry of the card should be. It is detected by the mobo bios as 4 heads 16 sectors and 500 cylinders, but cfdisk (or fdisk or sfdisk) SOMETIMES reported it as 2 x 16 x 500 or 2 x 8 x 1000 !!!
> > 
> > In short, has anybody had similar problems with cf cards or does anybody know of a source of information for using cf cards under linux.
> > 
> > Cheers
> > 
> > Dan
> > _______________________________________________
> > Peeweelinux mailing list
> > Peeweelinux@adis.on.ca
> > http://mail.adis.on.ca/lists/listinfo/peeweelinux
> _______________________________________________
> Peeweelinux mailing list
> Peeweelinux@adis.on.ca
> http://mail.adis.on.ca/lists/listinfo/peeweelinux
>