PeeWee: Installing Lilo.....failed

[Adi Linden]

On Thu, 11 Jan 2001, Adi Linden wrote:

> Hi,
> 
> Disk-On-Chip requires a special patched version of LILO. When using
> M-Systems Disk-On-Chip I recommend using a FAT based boot partition with
> syslinux as bootloader. It doesn't have any of the problems lilo has.
> 
> TTYL,
> Adi
> 
> 
> On Thu, 11 Jan 2001, Toche Pierre-Yves wrote:
> 
> > Hi !,
> > I need to install a bootable PeeWee Linux System on a 16Mo Disk On Chip...
> > So, I use pwlconfig to generate the file system and configure the boot 
> > device....
> > I've selected a basci file system for my target (with the Project File 
> > System menu), extract it and 
> > Configure the TArget Hardware....
> > I don't know which option to choose for Target 
> >  So I've kept : Compressed ramdisk on ext2 partition
> > I just want to generate a bootable system with all the basic linux 
> > directories and minimal tools...
> > After that I select : LoadFile System Onto Target /dev/msys/fla
> > All seem be OK but the results shown an error :
> > Installing Lilo............. failed :-(
> > 
> > I'm using the 0.53.25 version from a 2.2.5-15 kernel with a built in disk on 
> > chip driver...
> > 
> > Help please....
> > Thanks
> > PYT
> > 
> > 
> > ---------------------------------------------------
> > See the list archives at http://adis.on.ca/archives/
> > See the PWL homepage at  http://peeweelinux.com
> > ---------------------------------------------------
> > 
> 
> ---------------------------------------------------
> See the list archives at http://adis.on.ca/archives/
> See the PWL homepage at  http://peeweelinux.com
> ---------------------------------------------------
> 

---------------------------------------------------
See the list archives at http://adis.on.ca/archives/
See the PWL homepage at  http://peeweelinux.com
---------------------------------------------------