PEEWEE 0.53.27 network configuration? problem

[andu]

>
>I have some problems to run my peewee linux box at the network. My goal
>is to establish a simple telnet session to the linux box inside a
>intranet (192.168.0.xxx).
>
>I�m working with peewee 0.53.27.
>
>My peewee linux box has one network interface eth0 and my peewee system
>is based onto the example project "wireless isa" and it�s network
>scripts.
>
>I have connected a laptop at the linux box. The ping command will work
>fine from the laptop to the linux box and vice versa.
>
>A Telnet session locally at the linux box will work properly, but an
>attempt to start a telnet session from the laptop to the linuxbox will
>fail. With tcpdump i can see the telnet request, but an answer from the
>linux-box is missing.
>
>A telnet session from the linux box to the laptop will fail, too. With
>tcpdump I can see the request from the linux-box and the response from
>the laptop but nothing more will happen.
>
>It seems that all incoming ip-packets were lost at the linux box and
>don�t reach the application (INETD or TELNET).
>
>In my tests i�m working always with ip-addresses not with hostnames. I
>build different systems with all peewee kernels and my own custom
>kernel, but the result is always the same.
>
>It seems to be a configuration problem.
>
>Maybe I have to configure IP-masquerading or routing in a certain
>manner?
>
>Any idea why this isnt working?

Do you have telnet enabled in inetd.conf?

>
>Thank you for helping and reading my problem
>
>Peter
>
>---------------------------------------------------
>See the list archives at http://adis.on.ca/archives/
>See the PWL homepage at  http://peeweelinux.com
>---------------------------------------------------
>.


Regards, Andu 
_______________________
undo@cloud9.net
---------------------------------------------------
See the list archives at http://adis.on.ca/archives/
See the PWL homepage at  http://peeweelinux.com
---------------------------------------------------